Copying Glemco© content is not allowed.

Semitron® ESd 410C

Material Information

Find Material Matches For Your Project

Specifications

Physical PropertiesMetricEnglishComments
Density1.41 g/cc1.41 g/ccASTM D792
Water Absorption0.30%0.30%Immersion, 24hr; ASTM D570(2)
Water Absorption at Saturation1.10%1.10%Immersion; ASTM D570(2)
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M115 115ASTM D785
Hardness, Rockwell R125125ASTM D785
Hardness, Shore D8585ASTM D2240
Tensile Strength62.1 MPa9000 psiASTM D638
Tensile Strength at 150°C (300°F)17.2 MPa2500 psiASTM D638
Tensile Strength at 65°C (150°F) 34.5 MPa5000 psiASTM D638
Elongation at Break2.00%2.00%ASTM D638
Tensile Modulus5.86 GPa850 ksiASTM D638
Flexural Strength82.7 MPa12000 psiASTM D790
Flexural Modulus5.86 GPa850 ksiASTM D790
Compressive Strength134 MPa19500 psi10% Def.; ASTM D695
Compressive Modulus4.14 GPa600 ksiASTM D695
Shear Strength62.1 MPa9000 psiASTM D732
Izod Impact, Notched0.427 J/cm0.800 ft-lb/inASTM D256 Type A
Coefficient of Friction, Dynamic0.180.18Dry vs. Steel; QTM55007
K (wear) Factor252 x 10-8 mm³/N-M125 x 10-10 in³-min/ft-lb-hrQTM 55010
Limiting Pressure Velocity0.420 MPa-m/sec12000 psi-ft/min4:1 safety factor; QTM 55007
Electrical PropertiesMetricEnglishComments
Surface Resistivity per Square10000 - 1.00e+6 ohm10000 - 1.00e+6 ohm10^3 to 10^6; EOS/ESD S11.11
Dielectric Constant3 @ Frequency 1e+6 Hz3 @ Frequency 1e+6 HzASTM D150
Dissapation Factor0.0013 @ Frequency 1e+6 Hz0.0013 @ Frequency 1e+6 HzASTM D150
Thermal PropertiesMetricEnglishComments
CTE, Linear32.4 µm/m-°C @ Temp -40 -149°C18.0 µin/in-°F @ Temp -40 - 300°FASTM E831
Thermal Conductivity0.353W/m-K2.45 BTU-in/hr-ft²-°FASTM F433
Maximum Service Temperature, Air170 °C338 °FLong Term
Deflection Temperature at 1.8 Mpa (264 psi)210 °C410 °FASTM D648
Glass Transistion Temp, Tg210 °C410 °FASTM D3418
Flammability, UL94V-0 @ 3.17 mm ThickV-0 @ 0.125 in ThickEstimated Rating
Compliance PropertiesMetricEnglishComments
3A-DairyNoNo
Canada AGNoNo
FDANoNo
NSFNoNo
USDANoNo
USP Class VINoNo
Chemical Resistance PropertiesMetricEnglishComments
Acids, Strong (pH 1-3)UnacceptableUnacceptable
Acids, WeakAcceptableAcceptable
AlcoholsAcceptableAcceptable
Alkalies, Strong (pH 11-14)UnacceptableUnacceptable
Alkalies, WeakAcceptableAcceptable
Chlorinated SolventsUnacceptableUnacceptable
Conductive / Static DissipativeYesYes
Continuous SunlightAcceptableAcceptable
Hot Water / SteamAcceptableAcceptable
Hydrocarbons - AliphaticLimitedLimited
Hydrocarbons - AromaticUnacceptableUnacceptable
Inorganic Salt SolutionsAcceptableAcceptable
Ketones, EstersUnacceptableUnacceptable
Descriptive PropertiesMetricEnglishComments
Machinability41-10, 1 = Easier to Machine

NOTE: The information in this data sheet is for design guidance only. Forming methods and specific geometry could affect properties.

Overview

Semitron® ESd 410C is a static dissipative Polyetherimide with high strength and stiffness and resistivity in the 10^4 – 10^6 range. This material retains its dimensional stability at elevated temperatures making it ideal for extreme structural applications. It offers low stress for tighter tolerances during machining. Semitron® ESd products don’t rely on atmospheric phenomena (humidity) to activate, nor are surface treatments used to achieve dissipation which makes them inherently dissipative. Material data provided by Cope Plastics and Boedeker Plastics.

Applications & Usage

  • Wafer arm, holder and cassette guides
  • Back-Up Rings
  • Nozzles
  • Sensitive Semiconductor Processing Components
  • Photovoltaic Processing Equipment
  • Hard Disk Drive Parts
  • Integrated Circuit Components
  • High Speed Electronic Printing Parts
  • Circuit Boards
  • Medical Parts
  • Electronic test equipment such as nests, sockets and contactors

Industries Using This Material

Semiconductor

One of the original second source providers, Glemco has been manufacturing products in the US in support of the semiconductor industry for over 40 years. Our extensive history means that we can support the oldest legacy equipment or the newest cutting-edge implant technology, with available upgrades and enhancements to drive efficiency, reliability and performance improvements.

Semiconductor

One of the original second source providers, Glemco has been manufacturing products in the US in support of the semiconductor industry for over 40 years. Our extensive history means that we can support the oldest legacy equipment or the newest cutting-edge implant technology, with available upgrades and enhancements to drive efficiency, reliability and performance improvements.
Learn More

Medical

Our 5-axis high speed milling and multi-axis turning capabilities produce more accurate parts; multi-dimensional parts can be machined quickly without losing positional accuracy. With over 40 years of CNC experience in difficult to work materials and tight tolerances, Glemco is a shop you can rely on to provide the quality and precision you need.

Medical

Our 5-axis high speed milling and multi-axis turning capabilities produce more accurate parts; multi-dimensional parts can be machined quickly without losing positional accuracy. With over 40 years of CNC experience in difficult to work materials and tight tolerances, Glemco is a shop you can rely on to provide the quality and precision you need.

Telcom

Precisely crafted components are necessary to support this rapidly changing industry. Poor quality here can contribute to lost time around the globe. Our multi axis machining capabilities allow us to create highly accurate complex parts from a variety of high strength materials.

Telcom

Precisely crafted components are necessary to support this rapidly changing industry. Poor quality here can contribute to lost time around the globe. Our multi axis machining capabilities allow us to create highly accurate complex parts from a variety of high strength materials.

Specialists with 40 years’ experience in manufacturing high quality products for a global market.

Facebook
Linkedin
Instagram
Youtube

Contact Us

Address: 901 CR 270, Leander, TX 78641
Email: sales@glemco.com

Main: 512.259.0320
Toll Free: 800.621.9598
Fax: 512.259.5101

Copyright © 2020 Glemco. All rights reserved.  |  Privacy Policy

Close Menu

Glemco Privacy Policy

Glemco, Inc. operates the www.glemco.com website, which provides the SERVICE. This page is used to inform website visitors regarding our policies with the collection, use, and disclosure of Personal Information if anyone decided to use our Service, the Glemco website. If you choose to use our Service, then you agree to the collection and use of information in relation with this policy. The Personal Information that we collect are used for providing and improving the Service. We will not use or share your information with anyone except as described in this Privacy Policy. The terms used in this Privacy Policy have the same meanings as in our Terms and Conditions, which is accessible at www.glemco.com, unless otherwise defined in this Privacy Policy. Our Privacy Policy was created with the help of the Privacy Policy Template and the Privacy Policy Generator from TermsFeed  plus the Refund Policy Template.

Information Collection and Use – For a better experience while using our Service, we may require you to provide us with certain personally identifiable information, including but not limited to your name, phone number, and postal address. The information that we collect will be used to contact or identify you.

Log Data – We want to inform you that whenever you visit our Service, we collect information that your browser sends to us that is called Log Data. This Log Data may include information such as your computer’s Internet Protocol (“IP”) address, browser version, pages of our Service that you visit, the time and date of your visit, the time spent on those pages, and other statistics.

Cookies – Cookies are files with small amount of data that is commonly used an anonymous unique identifier. These are sent to your browser from the website that you visit and are stored on your computer’s hard drive. Our website uses these “cookies” to collection information and to improve our Service. You have the option to either accept or refuse these cookies, and know when a cookie is being sent to your computer. If you choose to refuse our cookies, you may not be able to use some portions of our Service.

Service Providers – We may employ third-party companies and individuals due to the following reasons:

To facilitate our Service;
To provide the Service on our behalf;
To perform Service-related services; or
To assist us in analyzing how our Service is used.

We want to inform our Service users that these third parties have access to your Personal Information. The reason is to perform the tasks assigned to them on our behalf. However, they are obligated not to disclose or use the information for any other purpose.

Security – We value your trust in providing us your Personal Information, thus we are striving to use commercially acceptable means of protecting it. But remember that no method of transmission over the internet, or method of electronic storage is 100% secure and reliable, and we cannot guarantee its absolute security.

Links to Other Sites – Our Service may contain links to other sites. If you click on a third-party link, you will be directed to that site. Note that these external sites are not operated by us. Therefore, we strongly advise you to review the Privacy Policy of these websites. We have no control over, and assume no responsibility for the content, privacy policies, or practices of any third-party sites or services.

Children’s Privacy – Our Services do not address anyone under the age of 13. We do not knowingly collect personal identifiable information from children under 13. In the case we discover that a child under 13 has provided us with personal information, we immediately delete this from our servers. If you are a parent or guardian and you are aware that your child has provided us with personal information, please contact us so that we will be able to do necessary actions.

Changes to This Privacy Policy – We may update our Privacy Policy from time to time. Thus, we advise you to review this page periodically for any changes. We will notify you of any changes by posting the new Privacy Policy on this page. These changes are effective immediately, after they are posted on this page.

Contact Us – If you have any questions or suggestions about our Privacy Policy, do not hesitate to contact us.

Measurement & Inspection Equipment

  • • Coordinates Measurement
  • • Optical Comparators
  • • Leak Check System
  • • Pressure Test System
  • • Height Gauges
  • • Surface Comparators & Plates
  • • Hardness Testers
  • • Digital Calipers
  • • Vernier Calipers
  • • Precision Squares
  • • Inside & Outside Micrometers
  • • Thread Micrometers
  • • Depth Micrometers
  • • Blade Micrometers
  • • Hole Micrometers
  • • Sine Bar and Angle blocks
  • • Torque Wrenches
  • • Gage Block & Pin Sets
  • • Bore Gages
  • • Chamfer Gages
  • • Indicators
  • • Refractometers
  • • Ring & Outside Gages
  • • Thickness Gages
Milling2
5Axis2
Machine User Interface

Milling Machinery

Positional and dynamic 5 axis machining centers, up to x= 60” y= 26” z= 24”
High speed drilling and tapping centers, up to x=24” y=15.75” z=24”
Vertical machining centers, up to x=24” y=12” z=12”

Turning Tools

2 axis, max diameter 9”, max thru spindle diameter 2”, Max length 22”
4 axis with live tooling, max diameter 14”, max thru spindle diameter 3”, Max length 24”
5 axis with live tooling, max diameter 9”, max thru spindle diameter 2.6”, Max length 4.7”

Wire EDMs

Max part size x=41” y= 32.25” z= 11.75”
Max cutting capacity x=23.5” y= 15.5” z= 12”

CNC Sheet Metal Forming Machinery

Precision 36 ton, 6 axis control press brake, 48” length, 4” stroke, 10” throat depth

Versatility & Support Tools

Mills and lathes
Surface grinders
Hydraulic presses
Sheet metal shears
Horizontal and vertical band saws
Indexers/Rotary tables
Kilns
Blue M Ovens

National Women Business Owners Corporation Certified

Glemco has met all necessary criteria for NWBOC certification. Liana Merriman is the controlling business owner and is the final decision maker to employees, supervisors and managers. Her control spans all management of the business including sales, production and financial operations. Partners, vendors and suppliers can be confident that Glemco is indeed a woman owned company. View our NWBOC Certificate.

Proud To Be An ISO 9001: 2015 Certified Company

Glemco appreciates that the customer is our business. We embrace ISO as a management tool, and believe that only by embracing the concepts of Total Quality Management can we best service our customers. Glemco is committed to total customer satisfaction, achieved through innovative solutions to our customer’s needs. We strive to offer the highest quality product with continual improvement of manufacturing processes, service, and delivery. View our ISO 9001: 2015 Certificate.