Copying Glemco© content is not allowed.

Nickel 200

Material Information

Specifications

Physical PropertiesMetricEnglishComments
Density8.89 g/cc0.321 lb/in³
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 462 MPa67000 psiAnnealed
Tensile Strength, Ultimate at Elevated Temperature 475 MPa68900 psiAnnealed prior to test; 300°C
Tensile Strength, Yield 148 MPa21500 psiAnnealed
Tensile Strength, Yield at Elevated Temperature 120 MPa17400 psiAnnealed prior to test; 300°C
Elongation at Break45%45%Annealed prior to test.
Elongation at Break at Elevated Temperature48%48%Annealed prior to test.; 300°C
Electrical PropertiesMetricEnglishComments
Electrical Resistivity9.6e-006 ohm-cm9.6e-006 ohm-cm
Curie Temperature360 °C680 °F
Thermal PropertiesMetricEnglishComments
CTE, linear 20°C 13.3 μm/m-°C7.39 μin/in-°F20-100°C
Specific Heat Capacity0.456 J/g-°C0.109 BTU/lb-°F
Thermal Conductivity70.2 W/m-K487 BTU-in/hr-ft²-°F
Melting Point1435 - 1446 °C2620 - 2630 °F
Solidus1435 °C2620 °F
Liquidus1446 °C2630 °F

NOTE: The information in this data sheet is for design guidance only. Forming methods and specific geometry could affect properties.

Overview

Nickel 200 is a ferromagnetic, commercially pure (99.6%) wrought Nickel with good mechanical properties over a wide range of temperatures, high ductility, and excellent resistance to many corrosives (in particular hydroxides). Ni 200 is used for a variety of processing equipment, particularly to maintain product purity in handling foods, synthetic fibers and alkalies.

It has roughly the strength of mild steel when annealed and can provide higher strength levels when in the “as rolled” condition. This alloy has a low annealed hardness and very low work-hardening rate that is desirable for cold forming operations such as deep drawing, spinning, coining, etc. It has been used in corrosion-resistant equipment such as caustic evaporators, spun anodes, combustion boats and laboratory crucibles, and electronic components where its excellent fabricating characteristics provide an advantage.

Nickel 200 exhibits good thermal and electrical properties. Its magneto-strictive properties (specifically significant length change when magnetized) make it ideal for use in sonic devices such as sonar or for control in ultrasonic welding.

Applications & Usage

  • Automotive screen and heating elements, lighting and lead wire
  • Food Processing
  • Synthetic fiber processing (such as production of viscose rayon)
  • Heat Exchangers
  • Chemical Industries
  • Electrical Industries
  • Manufacturing and handling of sodium hydroxide, particularly at temperatures above 300C
  • Manufacturing of soap
  • Manufacturing of vinyl chloride monomer
  • Reactors and vessels in which fluorine is generated and reacted with hydrocarbons
  • Analine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane and ethane
  • Electrical and electronic parts

Industries Using This Material

Semiconductor

One of the original second source providers, Glemco has been manufacturing products in the US in support of the semiconductor industry for over 40 years. Our extensive history means that we can support the oldest legacy equipment or the newest cutting-edge implant technology, with available upgrades and enhancements to drive efficiency, reliability and performance improvements.

Semiconductor

One of the original second source providers, Glemco has been manufacturing products in the US in support of the semiconductor industry for over 40 years. Our extensive history means that we can support the oldest legacy equipment or the newest cutting-edge implant technology, with available upgrades and enhancements to drive efficiency, reliability and performance improvements.
Learn More

Machining

With a well augmented modern manufacturing facility and a highly skilled team with experience in a broad variety of materials, we offer a full suite of CNC services for production ready parts. With a broad compliment of support equipment, we offer a multi-disciplinary, turnkey option that few other manufacturers can accommodate.

Machining

With a well augmented modern manufacturing facility and a highly skilled team with experience in a broad variety of materials, we offer a full suite of CNC services for production ready parts. With a broad compliment of support equipment, we offer a multi-disciplinary, turnkey option that few other manufacturers can accommodate.

Telcom

Precisely crafted components are necessary to support this rapidly changing industry. Poor quality here can contribute to lost time around the globe. Our multi axis machining capabilities allow us to create highly accurate complex parts from a variety of high strength materials.

Telcom

Precisely crafted components are necessary to support this rapidly changing industry. Poor quality here can contribute to lost time around the globe. Our multi axis machining capabilities allow us to create highly accurate complex parts from a variety of high strength materials.
Close Menu

Glemco Privacy Policy

Glemco, Inc. operates the www.glemco.com website, which provides the SERVICE. This page is used to inform website visitors regarding our policies with the collection, use, and disclosure of Personal Information if anyone decided to use our Service, the Glemco website. If you choose to use our Service, then you agree to the collection and use of information in relation with this policy. The Personal Information that we collect are used for providing and improving the Service. We will not use or share your information with anyone except as described in this Privacy Policy. The terms used in this Privacy Policy have the same meanings as in our Terms and Conditions, which is accessible at www.glemco.com, unless otherwise defined in this Privacy Policy. Our Privacy Policy was created with the help of the Privacy Policy Template and the Privacy Policy Generator from TermsFeed  plus the Refund Policy Template.

Information Collection and Use – For a better experience while using our Service, we may require you to provide us with certain personally identifiable information, including but not limited to your name, phone number, and postal address. The information that we collect will be used to contact or identify you.

Log Data – We want to inform you that whenever you visit our Service, we collect information that your browser sends to us that is called Log Data. This Log Data may include information such as your computer’s Internet Protocol (“IP”) address, browser version, pages of our Service that you visit, the time and date of your visit, the time spent on those pages, and other statistics.

Cookies – Cookies are files with small amount of data that is commonly used an anonymous unique identifier. These are sent to your browser from the website that you visit and are stored on your computer’s hard drive. Our website uses these “cookies” to collection information and to improve our Service. You have the option to either accept or refuse these cookies, and know when a cookie is being sent to your computer. If you choose to refuse our cookies, you may not be able to use some portions of our Service.

Service Providers – We may employ third-party companies and individuals due to the following reasons:

To facilitate our Service;
To provide the Service on our behalf;
To perform Service-related services; or
To assist us in analyzing how our Service is used.

We want to inform our Service users that these third parties have access to your Personal Information. The reason is to perform the tasks assigned to them on our behalf. However, they are obligated not to disclose or use the information for any other purpose.

Security – We value your trust in providing us your Personal Information, thus we are striving to use commercially acceptable means of protecting it. But remember that no method of transmission over the internet, or method of electronic storage is 100% secure and reliable, and we cannot guarantee its absolute security.

Links to Other Sites – Our Service may contain links to other sites. If you click on a third-party link, you will be directed to that site. Note that these external sites are not operated by us. Therefore, we strongly advise you to review the Privacy Policy of these websites. We have no control over, and assume no responsibility for the content, privacy policies, or practices of any third-party sites or services.

Children’s Privacy – Our Services do not address anyone under the age of 13. We do not knowingly collect personal identifiable information from children under 13. In the case we discover that a child under 13 has provided us with personal information, we immediately delete this from our servers. If you are a parent or guardian and you are aware that your child has provided us with personal information, please contact us so that we will be able to do necessary actions.

Changes to This Privacy Policy – We may update our Privacy Policy from time to time. Thus, we advise you to review this page periodically for any changes. We will notify you of any changes by posting the new Privacy Policy on this page. These changes are effective immediately, after they are posted on this page.

Contact Us – If you have any questions or suggestions about our Privacy Policy, do not hesitate to contact us.

Measurement & Inspection Equipment

Milling Machinery

Positional and dynamic 5 axis machining centers, up to x= 60” y= 26” z= 24”
High speed drilling and tapping centers, up to x=24” y=15.75” z=24”
Vertical machining centers, up to x=24” y=12” z=12”

Turning Tools

2 axis, max diameter 9”, max thru spindle diameter 2”, Max length 22”
4 axis with live tooling, max diameter 14”, max thru spindle diameter 3”, Max length 24”
5 axis with live tooling, max diameter 9”, max thru spindle diameter 2.6”, Max length 4.7”

Wire EDMs

Max part size x=41” y= 32.25” z= 11.75”
Max cutting capacity x=23.5” y= 15.5” z= 12”

CNC Sheet Metal Forming Machinery

Precision 36 ton, 6 axis control press brake, 48” length, 4” stroke, 10” throat depth

Versatility & Support Tools

Mills and lathes
Surface grinders
Hydraulic presses
Sheet metal shears
Horizontal and vertical band saws
Indexers/Rotary tables
Kilns
Blue M Ovens

National Women Business Owners Corporation Certified

Glemco has met all necessary criteria for NWBOC certification. Liana Merriman is the controlling business owner and is the final decision maker to employees, supervisors and managers. Her control spans all management of the business including sales, production and financial operations. Partners, vendors and suppliers can be confident that Glemco is indeed a woman owned company. View our NWBOC Certificate.

Proud To Be An ISO 9001: 2015 Certified Company

Glemco appreciates that the customer is our business. We embrace ISO as a management tool, and believe that only by embracing the concepts of Total Quality Management can we best service our customers. Glemco is committed to total customer satisfaction, achieved through innovative solutions to our customer’s needs. We strive to offer the highest quality product with continual improvement of manufacturing processes, service, and delivery. View our ISO 9001: 2015 Certificate.