Copying Glemco© content is not allowed.

Monel® 400

Material Information

Find Material Matches For Your Project

Specifications

Physical PropertiesMetricEnglishComments
Density8.80 g/cc0.318 lb/in³
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 550 Mpa79800 psiAnnealed
Tensile Strength, Ultimate450 MPa @ Temp 425°C65300 psi @ Temp 797°FAnnealed prior to test
Tensile Strength, Yield240 MPa34800 psiAnnealed
Tensile Strength, Yield170 Mpa @ Temp 425°C24700 psi @ Temp 797°FAnnealed prior to test
Elongation at Break48%48%Annealed prior to test
Elongation at Break50% @ Temp 425°C50% @ Temp 797°FAnnealed prior to test
Electrical PropertiesMetricEnglishComments
Electrical Resistivity0.0000547 ohm-cm0.0000547 ohm-cm
Curie Temperature20.0 - 50.0 °C68.0 - 122 °F
Thermal PropertiesMetricEnglishComments
CTE, Linear13.9 µm/m-°C7.72 µin/in-°FAt Temperatures of 20 - 100°C | 68.0 - 212°F
Specific Heat Capacity0.427 J/g-°C0.102 BTU/lb-°F
Thermal Conductivity21.8 W/m-K151 BTU-in/hr-ft²-°F
Melting Point1300 - 1350 °C2370 - 2460 °F
Solidus1300 °C2370 °F
Liquidus1350 °C2460 °F
Elemental PropertiesMetricEnglishComments
Carbon, C<= 0.30 % <= 0.30 %
Copper, Cu28 - 34 %28 - 34 %
Iron, Fe<= 2.5 % <= 2.5 %
Manganese, Mn<= 2.0 %<= 2.0 %
Nickel, Ni>= 63 %>= 63 %Including Cobalt
Silicon, Si<= 0.50 %<= 0.50 %
Sulfur, S<= 0.024 %<= 0.024 %

NOTE: The information in this data sheet is for design guidance only. Forming methods and specific geometry could affect properties.

Overview

Monel® 400 is a solid-solution nickel-copper alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. It is widely used in many fields, especially marine and chemical processing. Material data provided by Special Metals Corporation.

Applications & Usage

  • Fasteners
  • Valves
  • Pumps
  • Deaerating Heaters
  • Propeller Shafts
  • Electronic Components
  • Gasoline Tanks
  • Process Vessels
  • Crude Petroleum Stills
  • Chemical processing equipment
  • Marine applications such as fixtures, fasteners and piping

Industries Using This Material

Semiconductor

One of the original second source providers, Glemco has been manufacturing products in the US in support of the semiconductor industry for over 40 years. Our extensive history means that we can support the oldest legacy equipment or the newest cutting-edge implant technology, with available upgrades and enhancements to drive efficiency, reliability and performance improvements.

Semiconductor

One of the original second source providers, Glemco has been manufacturing products in the US in support of the semiconductor industry for over 40 years. Our extensive history means that we can support the oldest legacy equipment or the newest cutting-edge implant technology, with available upgrades and enhancements to drive efficiency, reliability and performance improvements.
Learn More

Energy

CNC machining technology has always been crucial in creating the complex devices that drive our energy industry. Advanced machining techniques are used to achieve the level of quality and efficiency needed to support today’s complex and varied methods of power generation.

Energy

CNC machining technology has always been crucial in creating the complex devices that drive our energy industry. Advanced machining techniques are used to achieve the level of quality and efficiency needed to support today’s complex and varied methods of power generation.

Telcom

Precisely crafted components are necessary to support this rapidly changing industry. Poor quality here can contribute to lost time around the globe. Our multi axis machining capabilities allow us to create highly accurate complex parts from a variety of high strength materials.

Telcom

Precisely crafted components are necessary to support this rapidly changing industry. Poor quality here can contribute to lost time around the globe. Our multi axis machining capabilities allow us to create highly accurate complex parts from a variety of high strength materials.

Specialists with 40 years’ experience in manufacturing high quality products for a global market.

Facebook
Linkedin
Instagram
Youtube

Contact Us

Address: 901 CR 270, Leander, TX 78641
Email: sales@glemco.com

Main: 512.259.0320
Toll Free: 800.621.9598
Fax: 512.259.5101

Copyright © 2020 Glemco. All rights reserved.  |  Privacy Policy

Close Menu

Glemco Privacy Policy

Glemco, Inc. operates the www.glemco.com website, which provides the SERVICE. This page is used to inform website visitors regarding our policies with the collection, use, and disclosure of Personal Information if anyone decided to use our Service, the Glemco website. If you choose to use our Service, then you agree to the collection and use of information in relation with this policy. The Personal Information that we collect are used for providing and improving the Service. We will not use or share your information with anyone except as described in this Privacy Policy. The terms used in this Privacy Policy have the same meanings as in our Terms and Conditions, which is accessible at www.glemco.com, unless otherwise defined in this Privacy Policy. Our Privacy Policy was created with the help of the Privacy Policy Template and the Privacy Policy Generator from TermsFeed  plus the Refund Policy Template.

Information Collection and Use – For a better experience while using our Service, we may require you to provide us with certain personally identifiable information, including but not limited to your name, phone number, and postal address. The information that we collect will be used to contact or identify you.

Log Data – We want to inform you that whenever you visit our Service, we collect information that your browser sends to us that is called Log Data. This Log Data may include information such as your computer’s Internet Protocol (“IP”) address, browser version, pages of our Service that you visit, the time and date of your visit, the time spent on those pages, and other statistics.

Cookies – Cookies are files with small amount of data that is commonly used an anonymous unique identifier. These are sent to your browser from the website that you visit and are stored on your computer’s hard drive. Our website uses these “cookies” to collection information and to improve our Service. You have the option to either accept or refuse these cookies, and know when a cookie is being sent to your computer. If you choose to refuse our cookies, you may not be able to use some portions of our Service.

Service Providers – We may employ third-party companies and individuals due to the following reasons:

To facilitate our Service;
To provide the Service on our behalf;
To perform Service-related services; or
To assist us in analyzing how our Service is used.

We want to inform our Service users that these third parties have access to your Personal Information. The reason is to perform the tasks assigned to them on our behalf. However, they are obligated not to disclose or use the information for any other purpose.

Security – We value your trust in providing us your Personal Information, thus we are striving to use commercially acceptable means of protecting it. But remember that no method of transmission over the internet, or method of electronic storage is 100% secure and reliable, and we cannot guarantee its absolute security.

Links to Other Sites – Our Service may contain links to other sites. If you click on a third-party link, you will be directed to that site. Note that these external sites are not operated by us. Therefore, we strongly advise you to review the Privacy Policy of these websites. We have no control over, and assume no responsibility for the content, privacy policies, or practices of any third-party sites or services.

Children’s Privacy – Our Services do not address anyone under the age of 13. We do not knowingly collect personal identifiable information from children under 13. In the case we discover that a child under 13 has provided us with personal information, we immediately delete this from our servers. If you are a parent or guardian and you are aware that your child has provided us with personal information, please contact us so that we will be able to do necessary actions.

Changes to This Privacy Policy – We may update our Privacy Policy from time to time. Thus, we advise you to review this page periodically for any changes. We will notify you of any changes by posting the new Privacy Policy on this page. These changes are effective immediately, after they are posted on this page.

Contact Us – If you have any questions or suggestions about our Privacy Policy, do not hesitate to contact us.

Measurement & Inspection Equipment

  • • Coordinates Measurement
  • • Optical Comparators
  • • Leak Check System
  • • Pressure Test System
  • • Height Gauges
  • • Surface Comparators & Plates
  • • Hardness Testers
  • • Digital Calipers
  • • Vernier Calipers
  • • Precision Squares
  • • Inside & Outside Micrometers
  • • Thread Micrometers
  • • Depth Micrometers
  • • Blade Micrometers
  • • Hole Micrometers
  • • Sine Bar and Angle blocks
  • • Torque Wrenches
  • • Gage Block & Pin Sets
  • • Bore Gages
  • • Chamfer Gages
  • • Indicators
  • • Refractometers
  • • Ring & Outside Gages
  • • Thickness Gages
Milling2
5Axis2
Machine User Interface

Milling Machinery

Positional and dynamic 5 axis machining centers, up to x= 60” y= 26” z= 24”
High speed drilling and tapping centers, up to x=24” y=15.75” z=24”
Vertical machining centers, up to x=24” y=12” z=12”

Turning Tools

2 axis, max diameter 9”, max thru spindle diameter 2”, Max length 22”
4 axis with live tooling, max diameter 14”, max thru spindle diameter 3”, Max length 24”
5 axis with live tooling, max diameter 9”, max thru spindle diameter 2.6”, Max length 4.7”

Wire EDMs

Max part size x=41” y= 32.25” z= 11.75”
Max cutting capacity x=23.5” y= 15.5” z= 12”

CNC Sheet Metal Forming Machinery

Precision 36 ton, 6 axis control press brake, 48” length, 4” stroke, 10” throat depth

Versatility & Support Tools

Mills and lathes
Surface grinders
Hydraulic presses
Sheet metal shears
Horizontal and vertical band saws
Indexers/Rotary tables
Kilns
Blue M Ovens

National Women Business Owners Corporation Certified

Glemco has met all necessary criteria for NWBOC certification. Liana Merriman is the controlling business owner and is the final decision maker to employees, supervisors and managers. Her control spans all management of the business including sales, production and financial operations. Partners, vendors and suppliers can be confident that Glemco is indeed a woman owned company. View our NWBOC Certificate.

Proud To Be An ISO 9001: 2015 Certified Company

Glemco appreciates that the customer is our business. We embrace ISO as a management tool, and believe that only by embracing the concepts of Total Quality Management can we best service our customers. Glemco is committed to total customer satisfaction, achieved through innovative solutions to our customer’s needs. We strive to offer the highest quality product with continual improvement of manufacturing processes, service, and delivery. View our ISO 9001: 2015 Certificate.